Skip to main content

​
Prerequisites

  • Empty USB flash drive, formatted to FAT32
  • Fresh out-of-box or factory-reset Bravia display - see supported models
Tip: Factory reset is located under Settings → System → About → Reset → Factory reset

​
Manual provisioning

​
Download the version of the signageOS app

https://a.signageos.io/sony.bpk

​
Install via USB

  1. Download the signageOS app of your choice
  2. Put the downloaded *.pkg file to an empty USB flash drive
  3. Start the Sony Bravia display
  4. Once you see the Welcome/select language screen, plug in the USB flash drive
  5. Do NOT continue with language settings just yet
  6. Confirm the “Allow access to USB”
  7. Bravia B2B installer starts up
  8. Confirm the installation
  9. Confirm the Device owner for the signageOS application
  10. Confirm reboot
  11. UNPLUG THE USB flash drive before the Bravia boots up
  12. Continue with the display setup
    • Confirm language
    • Confirm Google T&C
    • Confirm Sony Bravia Eula
  13. Now you can start the signageOS app from the menu
  14. Verify the device via verification hash